Motorola AP-7131 Product Reference Manual page 111

Community
OID
Access
3. Configure the
SNMP v3 User Definitions
SNMP v3 user definitions.
SNMP v3 user definitions allow read-only or read/write access to management information
as appropriate.
Add
Delete
Username
Security Level
OID
Use the Community field to specify a site-appropriate name for
the community. The name is required to match the name used
within the remote network management software.
Use the OID (Object Identifier) pull-down list to specify a setting of
All or a enter a Custom OID. Select
all OIDs in the MIB. The OID field uses numbers expressed in dot
notation.
Use the Access pull-down list to specify read-only (R) access or
read/write (RW) access for the community. Read-only access
allows a remote device to retrieve access point information, while
read/write access allows a remote device to modify access point
settings.
field (if SNMP v3 is used) to add and configure
Click Add to create a new entry for an SNMP v3 user.
Select Delete to remove an entry for an SNMP v3 user.
Specify a username by typing an alphanumeric string of up to 31
characters.
Use the Security Level
(no authorization), AuthNoPriv (authorization without privacy), or
AuthPriv (authorization with privacy).
The NoAuth setting specifies no login authorization or encryption
for the user.
The AuthNoPriv setting requires login authorization, but no
encryption.
The AuthPriv setting requires login authorization and uses the
Data Encryption Standard (DES) protocol.
Use the OID (Object Identifier) area to specify a setting of All or
enter a Custom OID. Select
in the MIB. The OID field uses numbers expressed in dot notation.
All to assign the user access to
area to specify a security level of noAuth
All to assign the user access to all OIDs
System Configuration 4-29