Network Wan Commands - Motorola AP-7131 Product Reference Manual

8.3.2 Network WAN Commands

AP7131>admin(network.wan)>
Description:
Displays the WAN submenu. The items available under this command are shown below.
show Displays the access point WAN configuration and the access point's current PPPoE configuration.
set Defines the access point's WAN and PPPoE configuration.
nat Displays the NAT submenu, wherein Network Address Translations (NAT) can be defined.
vpn Goes to the VPN submenu, where the access point VPN tunnel configuration can be set.
content Goes to the outbound content filtering menu.
dyndns Displays the Dynamic DNS submenu, wherein dyndns settings can be defined.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the current configuration to the access point system flash.
quit Quits the CLI and exits the current session.
For an overview of the WAN configuration options using the applet (GUI), see Configuring WAN Settings on page
8-39
5-16.