Motorola AP-7131 Product Reference Manual page 475

AP7131>admin(network.firewall)> advanced
Description:
Displays whether an access point firewall rule is intended for inbound traffic to an interface or outbound traffic from that interface..
Syntax:
show Shows advanced subnet access parameters.
set Sets advanced subnet access parameters.
import Imports rules from subnet access.
inbound Goes to the Inbound Firewall Rules submenu.
outbound Goes to the Outbound Firewall Rules submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to flash memory.
quit Quits and exits the CLI session.
Example:
admin(network.firewall.adv-lan-access)>inbound
admin(network.firewall.adv-lan-access.inb)>list
-----------------------------------------------------------------------------
Idx SCR IP-Netmask
-----------------------------------------------------------------------------
1 1.2.3.4
255.0.0.0
2 33.3.0.0
255.255.255.0
For information on configuring the Firewall options available to the access point using the applet (GUI), see
Settings on page 6-27.
Dst IP-Netmask TP
2.2.2.2 all 1:
255.0.0.0
10.10.1.1 tcp 1:
255.255.255.0
SPorts DPorts Rev
1: 0.0.0.0
65535 65535 nat port 33
1: 11.11.1.0 allow
65535 65535 nat port 0
NAT Action
deny
Configuring Firewall
8-147