Motorola AP-7131 Product Reference Manual page 219

Manually Pre-Shared
Key / No
Authentication
Kerberos
802.1x EAP
5. Enable and configure an
No Encryption
WEP 64 (40-bit key)
WEP 128 (104-bit key) Select the
KeyGuard
WPA/WPA2 TKIP
Select this button to disable authentication. This is the default
value for the Authentication
Select the Kerberos button to display the
Configuration field within the New Security Policy screen. For
specific information on configuring Kerberos, see
Kerberos Authentication on page
Select the 802.1x EAP button to display the
field within the New Security Policy screen. For specific
information on configuring EAP, see
Authentication on page
Encryption option if necessary for the target security policy.
If No Encryption is selected, encryption is disabled for the
security policy. If security is not an issue, this setting avoids the
overhead an encryption protocol causes on the
Encryption is the default value for the Encryption field.
Select the WEP 64 (40 bit key)
Settings field within the New Security Policy screen. For specific
information on configuring WEP 64, see
Encryption on page 6-16.
WEP 128 (104 bit key)
Settings field within the New Security Policy screen. For specific
information on configuring WEP 128, see
Encryption on page 6-16.
Select the KeyGuard button to display the
field within the New Security Policy screen. For specific
information on configuring KeyGuard, see
Encryption on page 6-18.
Select the WPA/WPA2 TKIP
Settings field within the New Security Policy screen. For specific
information on configuring WPA/WPA2 TKIP, see
WPA/WPA2 Using TKIP on page
Configuring Access Point Security
field.
Kerberos
6-8.
802.1x EAP Settings
Configuring 802.1x EAP
6-11.
access point
button to display the
Configuring WEP
button to display the
Configuring WEP
KeyGuard Settings
Configuring KeyGuard
button to display the
6-21.
Configuring
. No
WEP 64
WEP 128
WPA/TKIP
Configuring
6-7