Motorola AP-7131 Product Reference Manual page 608

9-14 AP-7131 Access Point Product Reference Guide
To configure the access point radio for mesh networking support:
NOTE The dual-radio model access point affords users better optimization of the
1. Select Network Configuration
menu tree.
2. Enable the radio(s) using the
Refer to
802.11a/n or 802.11b/g/n radio. After the settings are applied within this Radio
mesh network feature by allowing the access point to transmit to other
access points (in base or client bridge mode) using one independent radio
and transmit with its associated devices using the second independent
radio. A single-radio access point has its channel utilization and
throughput degraded in a mesh network, as the AP's single radio must
process both mesh network traffic with other access points and MU traffic
with its associated devices.
Enable
RF Band of Operation
-> Wireless -> Radio Configuration
checkbox(es) for both Radio 1 and Radio 2.
parameter to ensure you are enabling the correct
from the AP-7131