Motorola AP-7131 Product Reference Manual page 576

8-248 AP-7131 Access Point Product Reference Guide
AP7131>admin(system.fw-update)>set
Description:
Defines access point firmware update settings and user permissions.
Syntax:
set fw-auto
cfg-auto
file
path
server
user
passwd
admin(system.fw-update)>set fw-auto enable
admin(system.fw-update)>set cfg-auto enable
admin(system.fw-update)>set file 3.0.0.0-29D
admin(system.fw-update)>set path c:/fw
admin(system.fw-update)>set server 157.235.111.22
admin(system.fw-update)>set user mudskipper
admin(system.fw-update)>set passwd muddy
For information on updating access point device firmware using the applet (GUI), see
<mode> When enabled, updates device firmware each time the firmware versions are found to be
different between the access point and the specified firmware on the remote system.
<mode> When enabled, updates device configuration file each time the confif file versions are
found to be different between the access point and the specified LAN or WAN interface.
<name> Defines the firmware file name (1 to 39 characters).
<path> Specifies a path for the file (1 to 39 characters)..
<ip> The IP address for the FTP/TFTP server used for the firmware and/or config file update.
<name> Specifies a username for FTP server login (1 to 39 characters)..
<password> Specifies a password for FTP server login (1 to 39 characters).. Default is motorola.
Updating Device Firmware on page 4-50.