Call Forwarding Features / Commands; Set Up Call Forwarding System Wide; Call Forwarding On / Off Per Resident - DKS 1820 Owner's Manual

3.6 Call Forwarding Features / Commands

The Call Forwarding feature provides options that can forward lobby panel calls for a resident to a
forwarding number. There are several options available on how a call is forwarded and system
administrators should review all these options.
3.6.1 Set Up for Call Forwarding - System Wide
This determines how the call forwarding feature will function system wide. Four options are available:
0. Call forwarding is turned off.
1. Calls from the lobby panel to a resident are forwarded through the phone line connected
to the 1820 main control panel.
2. Calls from the lobby panel to a resident are forwarded through the phone line connected
to the 1820 main control panel but are restricted to preset area codes.
3. Calls from the lobby panel to a resident are forwarded through the resident's own phone
line.
Factory Default = 0 (Off)
1. Take the doorman telephone off hook.
2. Press *45 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter 0 or 1 or 2 or 3 _ then press * (beep).
4. Hang up the doorman telephone to end the programming session.

3.6.2 Call Forwarding On / Off per Resident

This programming sequence is used by the doorman or system administrator to turn call forwarding
on or off per resident. The resident can also turn call forwarding on or off from the apartment using
resident commands.
Note: If programmable directory codes are used, enter the directory code number instead of
the relay number in step 3.
Factory Default = 0 (Off)
1. Take the doorman telephone off hook.
2. Press *39 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3. Enter the four-digit relay number of the resident that call forwarding is being administered
for _ _ _ _ then press * (beep). Note: entering 9 9 9 9 in this step will turn call forwarding
on for all residents.
4. Enter 0 to turn call forwarding Off, or enter 1 to turn call forwarding On, then press *
(beep).
5. Repeat steps 3 and 4 to program additional residents.
6. Hang up the doorman telephone to end the programming session.
Page 40
1820-065-B-2-06