Table of Contents
Advertisement
Subtitle Display
Subtitle Language
When available, DVB subtitles will be displayed in the selected language. After all settings are adjusted
following to your preference, choose Save with pq and press ok. The receiver returns to the menu.
noTE
7.1.4 Parental Lock
This menu enables you to define and edit your PIN code, set Installation or Parental Lock. Choose a
setting with pq and press ok to list the possibilities or use tu to change the value of the highlighted
setting. Please read the displayed instructions for each screen carefully. They will help you adjusting the
settings correct and easy.
Current PIN Code
Parental Lock
Installation Lock
Parental Rate
New PIN Code
Confirm PIN Code
When all settings have been made, press
mode the receiver will inform with a message that it saves your settings.
noTE
7.1.5 factory Reset
A factory reset will restore your receiver to the factory default settings. It will delete all settings and
channels. To reset the receiver, you have to enter your PIN code (DEfAULT PIn: 0000), then use pq to
select OK to execute or Cancel to return to the menu. Afterwards the receiver will restart with the First
Time Installation.
Use tu to select ON or OFF depending on DVB subtitle display being
preferred or not.
Either use ok for a list with all available languages or tu to select a
language.
If you have switched the Subtitle Setting to ON, then subtitles will be
displayed automatically if available for this channel/movie. When the
setting is OFF the subtitles can be opened temporarily. Further information
about subtitles can be found on the respective videotext pages or websites
of the broadcast organisation.
Use the 0~9 buttons to access this menu options below. Enter the (DEfAULT
PIn: 0000) if you have not changed it.
Use tu to select ON or OFF. Parental Lock allows you to prevent children
from watching adult channels if these channels support EPG or submit
EPG based parental rate for your country. In below adjust the Parental Rate
accordingly.
Use tu to select ON or OFF. Installation Lock allows you to lock the access to
your Installation settings and channel edit menus.
Use tu to change these settings. Following rates are available: Unblocked,
6+, 10+, 12+,16+ and 18+ or All Blocked. Depending on the adjusted setting
you will have to enter your PIN code when switching through channels which
support EPG or submit EPG based parental rate.
Enter the PIN code of choice with the 0~9 buttons.
Use the 0~9 buttons to confirm your new PIN code.
to leave the Parental Lock menu. When returning to viewing
If you are using another Parental Lock function than Unblocked, all FTA
channels which support EPG or submit EPG based parental rate will require
entering of your PIN code (DEfAULT PIn: 0000).
21
Advertisement
Table of Contents
