Timer - Strong SRT 7504 User Manual


Use tu or 7/8 to navigate to the previous or next picture.
For pictures the following Options can be adjusted:
Slide Time:
Slide effect:
Repeat Mode
OFF
Once
All
Random
Press to quit or to leave this menu.

7.5 Timer

In this menu you can adjust the time and programme timers. These submenus are available: Time adjust
and Set Timer.
7.5.1 Time Adjust
This menu allows you to set the way the receiver collects and adjusts the time. You can also adjust the
Auto Standby function here. Use pq to highlight the setting you wish to change and tu or 0~9 to
change the value of the highlighted setting. Press ok for a list with all available options for the chosen
setting.
Auto Time Setting:
GMT Offset:
Summer time:
Current Date:
Current Time:
Auto Standby:
Standby after Timer setting: This function allows you to determine whether the receiver should switch to
28
A selected file will be immediately shown in preview mode. Press ok to
playback in fullscreen mode. For pictures the displayed options in the info
banner vary depending on the selected repeat mode: Press the RED Option
button to adjust the functions for playback (in preview and fullscreen mode).
Use the bLUE Rotate button to turn the picture in another direction.
Use tu to adjust the display time of a picture. Available settings are 1 sec ~ 8
sec.
Use tu to adjust the transition style from one picture to the next. Available
settings are Normal, Shutter, Stretch, Zoom out, Insert, Mosaic or Transparency
overlay.
The file will not be repeated
This option has no effect
All files of a folder will be repeated. A symbol will be displayed accordingly.
The files of a folder will be repeated randomly. A symbol will be displayed
accordingly.
Defines if the time is collected automatically via satellite, the default setting is
ON. Use tu to select OFF if you prefer to set up the time manually.
When the Auto Time Setting is kept ON the receiver shows the current used
offset. In case Auto Time Setting is OFF you can adjust the offset between:
+0:00 – -12:00 hours.
If Auto Time Setting is OFF you can adjust the summer time here.
If Auto Time Setting is OFF you can adjust the date here.
If Auto Time Setting is OFF you can adjust the current time here.
This function is a new power saving feature that helps reducing power
consumption. It switches the receiver to standby when no command has
been given from the remote control for at least the set time. Possible settings
are: 1H- 12H and OFF to deactivate this function.
standby after the end of the programmed timer(s) On, or whether the receiver
should remain switched on Off.