Main Menu; Installation - Strong SRT 7504 User Manual

For a detailed description of the menu please refer to chapter 7.4.4 hDD Manager of the user manual on
our website: www.strong.tv/downloads/manuals/7504_UM_EN.pdf.
WARnInG
noTE

7.0 MAIn MEnU

Press MEnU in viewing mode to display the Main Menu. All important settings and features of your
receiver can be operated from the Main Menu. It consists of the following sub-menus: Installation, Update
& Info, Conditional Access, Channel Manager and Timer. Use tu to select a sub-menu and pq to choose
an option. Press ok to advance to the chosen submenu.

7.1 Installation

This menu allows you to change satellite settings and to search for channels. Further you can adjust
important settings for your receiver. It consists of the following sub-menus: Antenna Setup, Channel
Search, System Settings, Parental Lock and Factory Reset. Choose a sub menu with pq and press ok to
advance.
7.1.1 Antenna setup
Use this menu to change or add settings for an already installed or new satellite and to configure its
parameters. Type configures which kind of DiSEqC you are using, use tu to change. In case your setup
differs from the default setting DiSEqC 1.0 you can adjust DiSEqC OFF by pressing t or DiSEqC 1.2 and
GOTO-X by pressing u. If you use DiSEqC OFF you will only be able to setup one satellite. Press q and
then ok to open the settings for this connection. For usage with DiSEqC 1.0 you can setup up to 4
satellite positions. If you use DiSEqC 1.2 or GOTO-X, you can install satellites which are received by your
motor dish. For setup and installation as well as for correct setup of the positions in the receiver we
highly recommend taking the advice of a professional dish installer and experienced dealer or technical
personnel.
7.1.1.1 Edit Lnb
Satellite
LNB Type
LNB Low Freq.
LNB High Freq.
22KHz Tone
LNB Power
16
For encrypted channels broadcasting rights may be limited by the seller,
which is why some channels are restricted during playback to fast forward/
rewind, or possibly limited in another way. When the Maturity Rating is
activated for a certain programme, you must enter the corresponding PIN
code MATURITY RATInG MAsTER PIn: 0000 to be able to record this
programme.
The default maturity rating master PIN can be changed by the operator.
Press ok to open the list of available satellites and chose the preferred
satellite with pq or P+/P- and confirm by pressing ok.
Choose LNB Type with tu if you are not using a universal LNB.
This shows the value for the appropriate LNB Type used and you can only
adjust for "Normal" LNB.
This shows the value for the appropriate LNB Type used and you can only
adjust for "Normal" LNB.
This setting for AUTO should not be changed, only if is necessary for your LNB
type.
Here you can change the LNB power with tu if necessary.