Page 3
Obr. 6 Satelitní anténa 100-240 V~ Koaxiální SCART kabel HDMI / 12 V kabel kabel Obr. 7 zařízení 100-240 V~ / 12 V Koaxiální kabel USB kabel Obr. 8 Obr. 9...
Page 4
Licenses ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S.
8.0 TRoUbLEshooTInG 9.0 sPECIfICATIons sTRonG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, Rohs 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
If the receiver does not operate normally, even after strictly following the instructions in the user manual available on our website www.strong.tv/downloads/manuals/7504_UM_EN.pdf it is recommended to consult your dealer or the appropriate service for your country. 1.2 storage Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture.
Always make backups of data on your USB storage device before using it with this receiver. STRONG will not take responsibility for any loss of information or circumstances caused by loss of information. Please ensure that either the USB device is already formatted to FAT32, or format the USB device via ...
3. Indicator LED GREEN indicates that the receiver is currently ON, GREEN and RED alternating indicates that the receiver is preparing to enter deep sleep, RED indicates that the receiver is currently in deep sleep mode. 4. smart card slot To insert your valid and activated Irdeto smart card for proper reception of your desired channel bouquet.
21. TEXT Opens the Teletext if available 22. sUb Shows the list of subtitle languages if available, in videotext opens the sub- page function Gives direct access to Irdeto Mails from your service provider 24. 2 To start Timeshift in viewing mode, in Multimedia and HDD Manager to pause playback of a file 25.
First Time Installation, please reset the receiver with the factory reset. See chapter 7.1.5 of the user manual on our website: www.strong.tv/downloads/manuals/7504_UM_EN.pdf. Please insert your valid and activated Irdeto smart card for proper reception of the channel bouquet of your choice. For correct insertion of the smart card please see the insertion drawing.
7.1.3.1 hDMI or 7.1.3.2 sCART of the user manual on our website: www.strong.tv/downloads/ manuals/7504_UM_EN.pdf. noTE If you select an HDMI resolution which your TV does not support, the receiver will switch to the previous setting automatically after ~10 sec.
5.0 QUICk GUIDE To UsInG YoUR RECEIvER We at STRONG understand that you can’t wait to enjoy your new HD receiver. The following quick guide will make you familiar with the basic operation of this device. We do, however, advice you to read the full manual on our website: www.strong.tv/downloads/manuals/7504_UM_EN.pdf.
Settings for the display duration can be set in menu 7.1.3 system settings of the user manual on our website: www.strong.tv/downloads/manuals/7504_ UM_EN.pdf.If available the current parental rating can be found in the information banner as well.
6.5 subtitles Some channels support a choice of different subtitle languages. Press the SUB button in viewing mode to display a list of available subtitle languages. noTE If you have switched the Subtitle Setting to ON, then subtitles will be displayed automatically for this channel/movie if available.
Timeshift only works correctly when a fast USB storage device such as a USB2.0 HDD is connected to the receiver. Distorted picture and/or audio during Timeshift indicate a too slow USB device speed. STRONG cannot guarantee for USB devices used. Especially when Timeshift is activated at channels with high data rate (High quality SD/HD), STRONG cannot guarantee an accurate playback of the Timeshift file.
For a detailed description of the menu please refer to chapter 7.4.4 hDD Manager of the user manual on our website: www.strong.tv/downloads/manuals/7504_UM_EN.pdf. WARnInG For encrypted channels broadcasting rights may be limited by the seller, which is why some channels are restricted during playback to fast forward/ rewind, or possibly limited in another way.
Page 17
Press ok to open the list of available transponders for the chosen satellite, in Transponder order to check your reception or align the antenna. Press the RED button SAT Edit to rename the chosen satellite and press the GREEn button Add TP to add a new transponder to this satellites database.
Press ok to open the keyboard and enter a new name with the 0 ~ 9 buttons Satellite: (max. 9 signs). When you have entered the preferred name, press pq to choose OK in order to rename or choose Cancel to discard. Use 0 ~ 9 to enter the orbital position.
Fast scan: Will rescan the channel list supplied by the operator that you have chosen. Fast Scan is only available on Astra 23.5E. When all settings have been made, press ok at the preferred scan method to start this scan process or to quit without scanning.
Page 20
TV Ratio 16:9 or 4:3, depending on the kind of your TV set. Conversion Letterbox, PanScan or Combined, to choose the preferred picture format. Only selectable for Scart Video Output Resolution 576p, 720p, 1080i or 1080p, to adjust the optimum resolution your TV set supports.
Use tu to select ON or OFF depending on DVB subtitle display being Subtitle Display preferred or not. Either use ok for a list with all available languages or tu to select a Subtitle Language language. When available, DVB subtitles will be displayed in the selected language. After all settings are adjusted following to your preference, choose Save with pq and press ok.
This function allows you to perform a software update with a USB storage device. Download the software and update instructions from our website www.strong.tv and unzip it on your PC. Then load the file to the root directory of your correctly formatted USB storage device and connect it to your receiver.
The OTA (Over the Air) function allows you to search for software updates available on satellite. Please ask your local STRONG dealer or visit our www.strong.tv for information. After pressing ok on OTA Software Update to execute your receiver will start looking for new software. Follow all instructions that are displayed on screen.
Age: The age for the group in above will be displayed here. User PIN Code: The PIN for the group/age in above will be displayed here. Add maturity rating group Press the RED button to create a new profile for a specific age. Maturity rating group: Here you will see the group displayed, starting with “0”.
noTE Removing a channel from a favourite group doesn’t remove this channel from the channel list. Delete channels Press the RED button to toggle between delete modes and then press ok to highlight the selected channels for deletion. Press once to delete a single channel or different selected channels from your channel list, press twice to delete the complete transponder of the selected channel (this will highlight all present channels), press three times to delete all channels from the satellite and four times to delete all TV channels from your channel list.
Page 26
WARnInG The format function will delete all recordings, data and information from your USB device. STRONG will not take any responsibility for damaged or lost data on the USB device. Please make a backup copy of important data on your USB device before using it with your receiver.
Page 27
WARnInG The format function will delete all recordings, data and information from your USB device. STRONG will not take any responsibility for damaged or lost data on the USB device. Please always backup or copy important data from your USB device before using it with your receiver.
A selected file will be immediately shown in preview mode. Press ok to playback in fullscreen mode. For pictures the displayed options in the info banner vary depending on the selected repeat mode: Press the RED Option button to adjust the functions for playback (in preview and fullscreen mode). Use the bLUE Rotate button to turn the picture in another direction.
If the receiver does not work properly after checking it, please contact your local service line or STRONG dealer. Alternatively you can send a support mail via our website: www.strong.tv. NEVER open or disassemble your receiver. This may cause a dangerous situation...
Page 30
symptom Cause Remedy Check that the power adapter is plugged The status LED on the The power adapter is not into the wall outlet. Make sure that the front panel does not plugged in or the power is power switch on the rear panel is in ON light up.
Page 31
Check your current subscription status in Conditional Access -- Irdeto CA System -- Product List Status together with your Expired subscription. service provider. Smart card awaiting No access to If the receiver was powered off/ new authorisation. No scrambled services disconnected from the signal for a longer subscription for the time it can take ~1-2h until a valid card is...
128 MB (NAND type) +2 MB Loader Flash (SPI type) SDRAM: 256 MB Multimedia Audio playback: MP3* Picture view: JPG, JPEG, BMP* *STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on file size, codec, bit rate and resolution...
Page 33
Connectors SAT IN SAT OUT HDMI TV SCART (RGB, CVBS, Audio L/R output with volume control) Digital audio S/PDIF coaxial USB 2.0 port, Type A: 5 V/1 A (max.) supported DC main power Power switch General Data Supply voltage: 100 - 240 V AC 50/60 Hz Output voltage: 12 V DC, 2.0 A Power consumption:...
Page 34
Supplied by STRONG & Co, Japan Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna Austria Email: support_at@strong.tv 25 Dec 2014 17:33...