Table of Contents
Advertisement
6.8 Instant Recording
Your new receiver allows you to make an instant recording of the programme you are watching. The
receiver automatically takes over the remaining time of the current programme. If you want to change
the duration for the recording, press 4 again. Enter the recording time with the 0~9 buttons. For a
recording duration of 45 min, just enter 45 and press ok or for 1h 30 min, just enter 130 and press ok.
The recording progress banner (at the upper left corner) and the programme information (in the lower
part) can be opened at any time by pressing Info. To stop the recording, press 3.
noTE:
WARnInG
6.9 Timeshift
The Timeshift function allows you to pause live broadcast and resume watching later. Press 2 to stop
the current broadcast. After any time you can press u to start time shifted playback. During Timeshift
a progress banner is displayed on the upper left corner of your TV screen. When you have reached the
current broadcast (via 6), the normal information banner with an additional tShF appears. To show or
hide it press the Info button and press 3 to stop Timeshift.
noTE
WARnInG
6.10 Playback of recording
If you have made recordings you can access the HDD Manager directly from viewing mode by pressing
u. Select the recorded event with pq and start the playback in full sceen mode with ok. Alternatively
you can press u to start playback in preview mode. Further options are displayed in the HDD Manager.
Please connect a USB storage device formatted in FAT32 with sufficient free
space before you start a recording. In the menu HDD Manager or Multimedia
Manager, you can format the USB-device, if necessary or you know the
device is formatted in another format. Alternatively confirm the message
displayed in TV-mode to format your USB-device. For recording of an HD
broadcast, we strongly recommend to use a high speed USB device.
For encrypted channels broadcasting rights may be limited by the provider
and recording may not be possible. Recordings via the analogue output
(VCR or DVD recorder) could also be blocked. When the Maturity Rating
is activated for a certain programme, you must enter the corresponding
PIN code MATURITY RATInG MAsTER PIn: 0000 to be able to record this
programme.
Timeshift only works correctly when a fast USB storage device such as a
USB2.0 HDD is connected to the receiver. Distorted picture and/or audio
during Timeshift indicate a too slow USB device speed. STRONG cannot
guarantee for USB devices used. Especially when Timeshift is activated
at channels with high data rate (High quality SD/HD), STRONG cannot
guarantee an accurate playback of the Timeshift file.
The broadcasting rights of encrypted channels may be limited by the
provider and fast forward/rewind may not be possible or the Timeshift
function may be limited.
15
Advertisement
Table of Contents
