Configure Ethernet Settings; Configuration Report - Xerox WorkCentre 3025BI User Manual

Configure Ethernet Settings

The Ethernet interface will automatically detect the speed of your network. The machine supports
hub/switch speeds of:
• Automatic
• 10 Mbps Full-Duplex
• 100 Mbps Full-Duplex
• 10 Mbps Half-Duplex
• 100 Mbps Half-Duplex
Set the Ethernet speed on the machine to match the speed set on your hub or switch:
Setting the Ethernet Speed at the Machine
1. Press the Machine Status button.
2. Press the up/down arrows to select Network and press OK.
3. Enter the Administrator Password using the alphanumerical keypad. The default is 1111.
4. Press the up/down arrows to select Ethernet and press OK.
5. Press the up/down arrows to select Ethernet Speed and press OK.
6. Press the up/down arrows to select one of the following speeds:
• Automatic
• 10 Mbps Half
• 10 Mbps Full
• 100 Mbps Half
• 100 Mbps Full
7. Press OK. The Saved screen displays.
To set the Ethernet Speed using CentreWare Internet Services, refer to
Using CentreWare Internet

Configuration Report

The Configuration Report details the machine software versions and network settings configured for
the machine.
Print a Configuration Report at the Machine
1. Press the Machine Status button.
2. Press the up/down arrows to select Information Pages and press OK.
3. Press the up/down arrows to select Configuration Page and press OK.
4. Press the up/down arrows to select Yes and press OK. The Printing screen displays and the
configuration report prints.
Services.
Installation Wizard
Setting the Ethernet Speed
Xerox® WorkCentre® 3025
User Guide
31