Table of Contents
Advertisement
Networked Printer (WorkCentre 3025NI)
Follow these instructions for installing drivers on your networked printers.
1.
Make sure that the printer is connected to your network and powered on.
2.
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation window appears.
If the installation window does not appear, select the Start button and then Run. Type
X:\Setup.exe, replacing "X" with the letter which represents your drive and select OK.
If you use Windows Vista, select Start > All Programs > Accessories > Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, select Run Setup.exe in Install or run program
field, and select Continue in the User Account Control window.
Select Install Software.
3.
4.
Select Network connection. The Select Software to Install window displays.
Note:
For custom install instructions, refer to
5.
Leave the default selections and select Next. The Installing Software window displays.
6.
After the installation is finished, the Setup Completed window displays. Select Print a test page
and select Finish.
If your printer is connected to the computer, a Test Print page will be printed. If the Test Print operation
is successful, refer to the Print chapter of this guide. If the print operation failed, refer to the
Troubleshooting chapter of this guide.
Custom
Installation.
Xerox® WorkCentre® 3025
Windows Drivers
43
User Guide
- Quick Links:
- Wireless Connectivity
Hide quick links:
Advertisement
Table of Contents
