Table of Contents
Advertisement
Windows Drivers
Windows Drivers
Installing Windows Drivers
The following provides instructions for installing Windows drivers on your computer so that your
computer can access your Xerox WorkCentre 3025 as a multifunction printer.
Local Printer
A local printer is a printer directly attached to your computer using a printer cable, such as a USB cable.
If your printer is attached to a network, refer to
Note:
If the New Hardware Wizard window appears during the installation procedure, select Close
or Cancel.
1.
Make sure that the printer is connected to your computer and powered on.
2.
Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and
an installation window displays.
If the installation window does not appear, select the Start button and then Run. Type
X:\Setup.exe, replacing X with the letter which represents your drive and select OK.
If you use Windows Vista, select Start > All Programs > Accessories > Run, and type X:\Setup.exe.
If the AutoPlay window appears in Windows Vista, select Run Setup.exe in the Install or run
program field, and select Continue in the User Account Control window.
3.
Select Install Software. The Printer Connection Type window displays.
4.
Select USB connection. The Select Software to Install window displays.
5.
Leave the default selections and select Next. The Installing Software window displays.
6.
After the installation is finished, the Setup Completed window displays.
7.
Select Print a test page and select Finish.
If your printer is connected to the computer, a Test Print page will be printed. If the Test Print operation
is successful, refer to the Print chapter of this guide. If the print operation failed, refer to the
Troubleshooting chapter of this guide.
42
Xerox® WorkCentre® 3025
User Guide
Networked Printer (WorkCentre
3025NI).
- Quick Links:
- Wireless Connectivity
Hide quick links:
Advertisement
Table of Contents
