Using Centreware Internet Services To Configure Settings On The Machine; Ethernet - Xerox CopyCentre C118 System Administration Manual

2.
In the URL field, enter "http://" followed by the internet address of the machine.
Then press the <Enter> key on the keyboard.
Example: If the internet address is vvv.xxx.yyy.zzz, enter the following in the URL field:
http://vvv.xxx.yyy.zzz
If the Port number is set, append that to the internet address as follows. In this
example, the port number is 80.
http://vvv.xxx.yyy.zzz:80
3.
Verify that the home page of CentreWare Internet Services is displayed.
The CentreWare Internet Services installation process is now completed.
If the test fails, refer to Problem Solving chapter for assistance.
NOTE: When your access to CentreWare Internet Services is encrypted,
enter "https://" followed by the internet address, instead of "http://".
Using CentreWare Internet Services to Configure Settings on
the Machine
This section provides the full listing of the items that can be set for each port through
CentreWare Internet Services.
Refer to the CentreWare Internet Services chapter of the User Guide for more
information. Select [Properties] > [Port Settings] to enable/disable each port.
NOTE: The following items display only if the port is activated. To activate a port
through CentreWare Internet Services, select [Port Status], and then the required port.
Ethernet – page 95
Parallel – page 96
USB – page 96
EtherTalk – page 97
SMB (Microsoft Networking) – page 97
NetWare – page 98
TCP/IP – page 99
LPD – page 100
SNMP – page 101
IPP – page 101
Port9100 – page 102
UPnP – page 102
E-mail – page 103
HTTP – page 104

Ethernet

This page allows you to configure the Ethernet settings for the following options.
Xerox CopyCentre/WorkCentre 118 System Administration Guide

Using CentreWare Internet Services to Configure Settings on the Machine

95