Xerox WorkCentre 3025BI User Manual page 189

11. The Firmware Upgrade Wizard screen appears. In the Firmware File area:
Select Browse.
a.
b. Locate and select the software upgrade .hd file obtained earlier.
c. Select Open.
12. Select Next. The firmware will now be verified and display information about the upgrade file.
13. Select Next to continue. The upgrade should take less than 10 minutes unless there are network
issues.
14. Once the machine has completed the upgrade it will reboot automatically. The configuration
report will print (if enabled). Check the configuration report to verify that the software level has
changed.
Software Update
® ®
Xerox WorkCentre 3025
User Guide
179