Using The Report Of A Motion Search - Honeywell Rapid Eye Operator's Manual

TIP!

Using the Report of a Motion Search

TIP!
Document 800-07767 Rev A
02/11
2. Enter a filename and select a folder, as needed.
3. Click Save. The information is saved in a file that has an .rmc extension.
4. In a Motion Search session, click the Stream drop-down arrow to display a list of the
site's cameras. You can see the arrow in
5. Select a camera from the Stream list.
6. Click Load Cfg (load the configuration settings). A dialog appears for selecting a
computer file.
7. Select a file with an .rmc extension, as needed.
8. Click Open.
9. Click Fetch, and then click Search.
Reusing settings on the same video generates the same motion detection report. For
a different report, change the motion options, the date and time or both.
1. The report from a motion search can be saved as a text file. To do so, click Save (see
on 66). A dialog appears for saving the report as a text file.
Figure 5-7 page
2. Enter a filename and select a folder, as needed.
3. Click Save. The text file of the motion search report can be opened using a word
processor, for further enhancement.
You have the option of filtering the magnitudes and/or trimming the report before
saving it as a text file. Only the items displayed in the list are saved to the file.
Rapid Eye Remote View Operator Guide
on
Figure 5-3 page 62.
75