Playing Back Archived Video And Data; Figure 11-6 Archival Playback Select Date And Time Window; Figure 11-7 Select Streams For Archival Playback Window; Figure 11-8 Archival Playback Options And Controls - Honeywell Rapid Eye Operator's Manual

Playing Back Archived Video and Data

Document 800-07767 Rev A
02/11
Before you can play back archived data, you must first set up an archival server and
discover the sites on the archival server (see
Discovering Sites on the Archival Server
1. Select a site listed under an Archival Server and click Playback (
Playback Select Date and Time window
Figure 11-6 Archival Playback Select Date and Time Window
2. Use the Date drop-down arrow to open the calendar utility. Select the date and time
from which data is to be played back. Click the left or right arrows to change the
month that is displayed.
3. Select an element of the Time field (hours, minutes, seconds, AM/PM) and use the
arrow buttons ( ) to change the playback time.
4. Click OK. The Select streams for Archival Playback window
Figure 11-7 Select Streams for Archival Playback Window
5. Select the video and data streams that you want to play back. To select more than
one camera, press the
6. Click OK. Video from the selected streams will play back in the View application. Use
the playback controls to find the video you are looking for. See
Video, for more information on playback options and controls
Figure 11-8 Archival Playback Options and Controls
Rapid Eye Remote View Operator Guide
Setting Up an Archival
on page 126). To play back video and data:
(Figure 11-6) appears.
or keys while selecting the streams in the list.
Ctrl Shift
Server, page 125, and
). The Archival
(Figure 11-7) appears.
Chapter 3, Recorded
(Figure
11-8).
127