Creating Clips During Playback - Honeywell Rapid Eye Operator's Manual

Archival Policies

Creating Clips During Playback

128
Note Playback of archived data is NOT continuous. Because the archived data is
chunked into 30 minute files, playback of the data can only occur within the
30 minute data file that is currently selected. If you want to play the next 30
minutes of video, you will need to close the viewing window, click Playback
again, and select the appropriate time in the Select Date and Time window.
Note If media is not available from
the requested time, the Late
Media Indication window will
open. This window shows the
nearest future time at which
data is available. Click OK to
start playback from this time.
Clips made from archived video and POS data only include the streams that are being
shown while making the clip. When you select the streams to play back, only select the
streams that you want included in the clip.
1. First, start playing back some video (see
Make sure the only streams open are the ones you want to include in the clip.
2. Use the playback controls to find the point in the video that you want to start recording
the clip at (see
Chapter 3, Recorded
3. Click on the Playback toolbar. The color of the button changes to red and flashes
while a clip is being created from recorded video. You have the option of clicking the
Fast Forward button on the playback toolbar to reduce the time spent making the clip.
4. When all the video you need is recorded, click
File window appears (see
5. Name the clip and choose a folder where the clip will be stored. Click Save. The clip
will be saved as an .rem file.
Playing Back Archived Data
Video, for more information).
again. The Save Recorded Clip To
Figure 11-9.)
on page 125).