Viewing Video In A Retrieval Session; Returning To A Motion Session From A Retrieval Session; False Positive Reports; Figure 5-13 Item Box Shown When Retrieval Starts From A Motion Session - Honeywell Rapid Eye Operator's Manual

Viewing Video in a Retrieval Session

Item box

Returning to a Motion Session from a Retrieval Session

False Positive Reports

Document 800-07767 Rev A
02/11
1. Select one or many items in the Motion Search report.
2. Click Retrieval. A Retrieval session starts, starting at the time that the selected item's
motion was detected. Select the cameras to view. A box is added, showing that a
Motion event is being shown. When many items are selected, they are listed in that
Retrieval session's item box (see
Figure 5-13 Item Box Shown when Retrieval Starts from a Motion Session
The Motion Search report is still available in the Motion session, if you need video from
motion that occurred at other times.
1. Either:
• Select the Motion heading on the site tree.
• Drag the Retrieval session aside. If the tear-away player is maximized, resize the
Retrieval session before dragging it aside.
• Close the Retrieval session.
2. In the Search for Motion window, either:
• Double-click a list item. The video excerpt plays in the working frame of the
Search for Motion window (see
• Select one or many items, then click Retrieval. A Retrieval session starts, using
all cameras and starting at the time of the first of the selected items.
Motion search can be triggered by changes in lighting or movement outside of an area of
interest.
Rapid Eye Remote View Operator Guide
Figure 5-13).
on
Figure 5-7 page 66).
71