Honeywell Video Analytics; Table 1-2 Commands To Open Video Analytics Sessions - Honeywell Rapid Eye Operator's Manual

Command Function
Ends the connection to a site, giving you a quick, way to end all sessions
involving a site.
Lists a site's name, version of software, serial number, time zone and
connection information.

Honeywell Video Analytics

Command
a
Honeywell Video Analytics icons/commands can only be used on Rapid Eye Active Alert units
that have Video Analytics activated.
b
Honeywell Video Analytics documentation is available at the operator's PC. Click Start
Programs
(choose the document you want to view). Some of the material in the HVA documentation
does not apply to HVA use from within Rapid Eye.
Document 800-07767 Rev A
02/11
Table 1-1 Sites Toolbar Reference (cont'd)
The View application displays up to four Honeywell Video Analytics (HVA) commands, on
the Sites toolbar, depending on the rights of the Rapid Eye Operator's account.
Honeywell Video Analytics can only be used on Rapid Eye Active Alert units that have Video
Analytics activated.
See the
Video Analytics V4 Rapid Eye DVR Integration Application
800-03866, for more information on using Video Analytics with Rapid Eye.
Table 1-2 Commands to Open Video Analytics Sessions
a
Session (opens)
Live Monitoring Station
session.
Forensics session.
Configuration Tool session.
Report Generator session.

Honeywell Video Analytics
Note Use of an HVA command on a unit without HVA only produces a message.
Rapid Eye Remote View Operator Guide
Section
N/A
Site Properties
page
Note, publication number
b
Reference
See the
Video Analytics Reference
Honeywell, publication number 800-04267.
See the
Video Analytics Reference
Honeywell, publication number 800-04267.
See the
Video Analytics Reference
Honeywell, publication number 800-04267.
See the
Video Analytics Reference
Honeywell, publication number 800-04267.
 
Documentation
HVA publication title
Reference,
24
Guide, by
Guide, by
Guide, by
Guide, by

All
27