Checking The Windows Date And Time On An Operator's Pc; Temporarily Changing A Time Reference; Resolution Gauge And Recording Indicator For Live Video; Figure 2-7 Resolution Gauge For An Ntsc Camera During Live Sessions - Honeywell Rapid Eye Operator's Manual

Live Video

Checking the Windows Date and Time on an Operator's PC

Temporarily Changing a Time Reference

Resolution Gauge and Recording Indicator for Live Video

34
The time on an Operator's PC is displayed in the bottom right-hand corner of the screen.
Hover your mouse over the time display to view the date tooltip. Use the control panel to
change the date and time options on your PC, as needed.
Click Set Time Reference on the tear-away player's File menu. A Customize Time
Reference for Session dialog (similar to
reference to either your LTZ, the camera's RTZ or to UTC. When you close the tear-away
player, these temporary settings are reset.
Automatic Optimization of Resolution for Live Video
If an operator changes the size of a camera window, the resolution of the images are
optimized for speed and image definition. A resolution gauge reports the change. See
(for NTSC) and
Figure 2-7
Figure 2-7 Resolution Gauge for an NTSC Camera During Live Sessions
Small camera windows for Live sessions
automatically use low resolution
This camera's video feed is being
recorded (indicated by red bar)
2-6) is displayed to set the time display
Figure
(for PAL).
Figure 2-9
Indicator or live resolution (NTSC)
Gauge for recorded frame rate