Clip Players; Remm Clip Player Software; Rapid Eye Clip Player (Rcp) Software - Honeywell Rapid Eye Operator's Manual

Clips and Stills

Clip Players

REMM Clip Player Software

Rapid Eye Clip Player (RCP) Software

104
When distributing clips to people who do not have View software, two software Clip Players
are available:
• REMM Clip Player, from the Honeywell website. See
page 104, for the web page address.
• Rapid Eye Clip Player, from a Multi-Media unit.
Installing a Player
One or both players can be installed on the same PC. Only one is needed to play clips.
View Software
On a PC running View, an operator does not need a clip player to view clips; the View
application can be used to view clips. The REMM Clip Player cannot be installed on a PC
running Rapid Eye View software, however the Rapid Eye Clip Player can.
To view clips obtained from a View operator, the recipient needs to download a free, zipped
copy of the REMM Clip Player from Honeywell's Download Center:
1. From the recipient's PC, use a web browser to navigate to:
http://www.honeywellsystems.com/support/download-center/index.html
2. Follow the instructions on the webpage to obtain a username and password and then
login to the Download Center.
3. Navigate to the Rapid Eye section of the Download Center. Scroll down and find the
link to Clip Player - Web Edition [version number, build number].
The numbers of the version and build are unimportant.
4. Click the Clip Player - Web Edition link. You can either run or save the
REMClipPlayer.exe file.
5. Run REMClipPlayer.exe to setup the REMM Clip Player. After setup, the Windows
desktop displays the icon.
6. Double-click the REMM Clip Player icon, and browse to find and select the clip.
When a Multi-Media unit is used to make or copy clips to DVD onsite, Rapid Eye Clip Player
software is also copied to the DVD. On a PC running Microsoft Windows, the Rapid Eye Clip
Player runs automatically when the DVD is inserted in the DVD drive.
REMM Clip Player Software,