Playback Speed Slider; Scanning A Recorded Video Feed Quickly; Slowing Down And Pausing A Recorded Video Feed; Skipping Through Recorded Video - Honeywell Rapid Eye Operator's Manual

Recorded Video

Playback Speed Slider

Scanning a Recorded Video Feed Quickly

Slowing Down and Pausing a Recorded Video Feed

TIP!

Skipping Through Recorded Video

52
Older Units
On older Multi-Media units, video starts from the start of the minute of the requested time.
Figure 3-2 The Playback Speed Slider
Drag the speed slider to the right of its center position. The slider's speed setting appears
as a tool tip (see
Figure 3-2).
Drag the speed slider to the left of its center position. Sliding it to the very left pauses the
video.
Dial-up connections cannot achieve playback speeds much greater than double
speed (2x), even if the Speed Slider is set at higher values.
For quickly spotting recorded video, drag the Skip-to-time slider to the right of its center
position. A tool tip shows the amount of skip (see
slider returns to its center position. Skipping can be combined with playback speed (see
above), to scan for video.
Figure 3-3 Skipping to a Later Time
3-3). After use, the Skip-to-time
Figure