Event Searches; Preparation; Searching For Event Records - Honeywell Rapid Eye Operator's Manual

Event Searches

Preparation

Searching for Event Records

Document 800-07767 Rev A
02/11
Only Logged Events can be Searched
Before you can search for the record(s) of an event, you or your Multi SA needs to set the
event to be logged, prior to an event's occurrence. Afterwards, a log entry is made on the
Rapid Eye Multi-Media unit each time that event occurs.
While a site name is selected, on the Sites tab:
1. Click .
2. Enter a date and time in the From and To fields (see
3. Click the tab of the event whose occurrences are to be searched. For a list of what
can be searched, see
4. Click Start. The Start button is unavailable until dates and times differ in the From
and To fields.
Note Motion events are selected on the Analytics tab.
on
Table 10-1 page 121.
10
on
Figure 10-1 page 120).
119