Motion Detection - GeoVision VSV13-A-EN User Manual

4.1.2 Motion Detection

You can set different levels of motion detection sensitivity in one region.
1. Select the sensitivity level by moving the slide bar. There are three levels. The higher
the level, the more sensitive the unit is to motion. The default value is 2.
2. Drag an area on the image. You will be prompted to click Add to save the setting.
3. To create several areas with different sensitivity levels, repeat Steps 1 and 2
4. Click the Save button to save the above settings.
5. If you want to trigger the output(s) when motion is detected, check the outputs (from
Output 1 to Output 4) and click the Apply button.
Note: Only 8 detection areas can be set up for one camera.
20
Figure 4-3