Motion Detection - GeoVision GV-VS04H User Manual

4.1.3 Motion Detection

Motion detection is used to generate an alarm whenever moveme
image. You can configure up to 8 areas with different sensitivity values for motion
detection.
1. The default sensitivity value for the whole area is 2 for GV-VS0
/ 14, and the value is 9 for GV-
a different sensitivity value, click Reset.
2. Select the desired sensitivity by moving the slider to set the value. The higher the
value, the more sensitive the camera is to motion.
3. Drag an area on the image. Click Add when you are prompted to confirm the setting.
4. To create several areas with different sensitivity values, repeat Steps 2 and 3.
5. Click Apply to save the above settings.
Figure 4-6
VS2420 / 2400 / 2401 / 2820 / 2800 / 21600. To define
Administrator Mode
4
nt occurs in the video
4H and GV-VS11 / 12
59