Setting Up Ip Cameras - GeoVision VSV13-A-EN User Manual

7.1 Setting up IP Cameras

To set up IP cameras on the GV-System, follow these steps:
Note: The IP Camera settings only work with the GV-Video Server. Currently, the GV-
System does not support any IP Camera.
1. Click the Configure button, point to Camera / Audio Install and select IP Camera
Install. This dialog box appears.
Figure 7-2
2. Check Install IP Camera, and select the number of IP Cameras you want to link to.
3. Click Configure and then Add Camera. This dialog box appears.
4. In the Query Server section, type the GV-Video Server's IP address (or domain name),
port number (the default value is 10000), and login username and password.
5. In the Network Type section, select WAN or LAN.
6. Click Query to detect the GV-Video Server.
7. In the Camera List section, select the camera for live view from the Preview drop-
down list, and the camera for recording from the Record drop-down list.
8. Click Apply. The server information should be displayed.
Figure 7-3
DVR Configurations
7
59