GeoVision VSV13-A-EN User Manual page 47

Administrator Mode
4
To enable the DDNS function, the Administrator should first apply for a Host Name from
the DDNS service provider's website. There are 2 providers listed in the GV-Video Server:
GeoVision DDNS Server and DynDNS.org.
To enable the DDNS function:
1. Enable: Enable the DDNS function.
2. Service Provider: Select the DDNS service providers you have registered with.
3. Host Name: Type the host name used to link to the GV-Video Server. For the users of
GeoVision DDNS Server, it is unnecessary to enter the host name.
4. User Name: Type the user name used to enable the service from the DDNS.
5. Password: Type the password used to enable the service from the DDNS.
6. Click Apply.
[HTTP Port Settings]
The HTTP port enables connecting the GV-Video Server to the web. For security
integration, the administrator can hide the server from the general HTTP port by changing
the default HTTP port of 80 to a different port number within the range of 1024 thru 65535.
[Video Server Streaming Port Settings]
The VSS port enables connecting the GV-Video Server to the GV-System. The default
setting is 10000.
[UPnP Settings]
UPnP (Universal Plug & Play) is a networking architecture that provides compatibility
among networking equipment, software and peripherals of the 400+ vendors that are part
of the Universal Plug and Play Forum. It means that they are listed in the network devices
table for the operating system (such as Windows XP) supported by this function.
Enabling this function, you can connect to the GV-Video Server directly by clicking on the
GV-Video Server listed in the network devices table.
43