Motion Detection - GeoVision GV-VS01 Manual

4.1.2 Motion Detection

You can set alerted boxes on the image to detect motion events. When motion is detected,
alarms are triggered.
1. Select Camera 1 or Camera 2 for configuration.
2. Select the detection sensitivity level by moving the slide bar. There are three
sensitivity levels, and the default level is 1.
3. Drag the detection areas on the image.
4. Click the Save button to save the above settings.
5. To set the selected outputs to be triggered when motion is detected, check the
outputs below (from Output 1 to Output 4) and click the Apply button.
Note: Only 8 detection boxed can be outlined on one camera.
20
Figure 4-3