GeoVision VSV13-A-EN User Manual page 54

4.8.5 Tools
This section allows you to execute certain system operations and view the firmware
version.
[Host Settings] Set the host name of the GV-Video Server.
[Firmware Update] This section displays the firmware version of the GV-Video Server.
[System Settings]
Clicking the Load Default button will make the GV-Video Server restore factory default
settings. The Ready LED on the front panel will turn off. Wait until the Ready LED turns on
and re-log in the server.
Note: After applying the default function, you will need to configure the GV-Video Server's
network setting again.
[Reboot]
Clicking the Reboot button will make the GV-Video Server perform a software reset. The
Ready LED on the front panel will turn off. Wait until the Ready LED turns on and re-log in
the server.
50
Figure 4-29