Monitoring - GeoVision VSV13-A-EN User Manual

4.4 Monitoring

You can start recording manually, by schedule or by input trigger.
[Manual] Manually activate recording and I/O monitoring.
Select all: Select all options to start recording and I/O monitoring as well.
Camera 1, Camera 2: Manually start recording. Select the desired camera(s) and the
recording mode for recording.
Input: Manually start I/O monitoring. When the input(s) is triggered, its associated
cameras and outputs will also be enabled for recording and alerting. For input settings,
see 4.2.2 Input/Output Settings.
[Schedule] The system starts recording and I/O monitoring based on the schedule you set.
For schedule settings, see 4.5 Recording Schedule.
[Start/stop monitoring by Input X] Start and stop monitoring by the input assigned.
When the assigned input is triggered, the system will response based on your recording or
I/O monitoring settings in above Manual or Schedule options.
[Camera Status Icon]
: Manual recording
: On standby
Figure 4-18
: Schedule recording
: Enabled for motion detection and input trigger
Administrator Mode
4
35