GeoVision VSV13-A-EN User Manual page 35

4. User Name: Type the user name registered on Center V2.
5. Password: Type the password registered on Center V2.
6. Click Apply. The Connection Status should display "Connected" and connected time.
These options you can also find on this Center V2 setting page:
Cease motion detection message from: Stops notifying Center V2 of motion
detection from selected camera(s).
Cease input trigger message from: Stops notifying Center V2 of input trigger from
selected input(s).
Enable schedule mode: Starts the Center V2 monitoring based on the schedule you
set in the Select Schedule Time section.
For the related settings to activate Center V2 monitoring, see 4.1.2 Motion Detection, 4.2.2
Input/Output Setting.
Administrator Mode
4
31