Physical Description; Front View - GeoVision VSV13-A-EN User Manual

1.2 Physical Description

This section identifies the various components of the GV-Video Server.

1.2.1 Front View

No. Name
1 Video Input
2 Video Stream Switch
3 Audio Input
4 Speaker Output
5 Reset Button
6 Default Button
7 Disk Full LED
8 Ready LED
9 Power LED
2
1 2
Figure 1-1
Function
2 plugs for video inputs.
The switch is designed for 2 cameras mode in live view.
When the switch is set in
VS01, dual streams of Video 1 are displayed.
VS02, Video 1 and Video 2 are displayed simultaneously.
Ensure to reboot the GV-Video Server after changing the setup.
2 plugs for audio inputs.
A plug for the speaker device.
It reboots the GV-Video Server, and keeps all current
configurations.
It resets all configurations to their factory settings.
To use this function, follow these steps:
(1) Press the Reset Button.
(2) Press and hold the Default Button until the 3 LED lights are on.
(3) Wait until the Disk LED is off and Ready LED is on. You
successfully return to the default settings.
This LED is on, indicating the hard drive is full.
This LED is on, indicating the GV-Video Server is ready for
connection.
This LED is on, indicating the power is supplied.
3 4 5
9
8
7
6