Getting Started - GeoVision VSV13-A-EN User Manual

1. Open your web browser, and type the default IP address
2. In both Login and Password fields, type the default value admin. Click Apply.
3. In the left menu, select Network and then LAN to begin the network settings.
4. According to your network environment, select one of these methods to set the IP address:
Dynamic IP Address, Static IP Address and PPPoE. For details on the LAN
Configuration, see 4.5.1 LAN.
Important:
•
Dynamic IP Address and PPPoE should only be enabled if you know which IP
address the GV-Video Server will get from the DHCP server or ISP. Or you must
use the Dynamic DNS service to obtain a domain name linked to the GV-Video
Server's changing IP address first.
For details on Dynamic DNS Server settings, see 4.7.3 Advanced TCP/IP.
•
If Dynamic IP Address and PPPoE is enabled and you cannot access the unit,
you may have to reset it to the factory default settings and then perform the
network settings again.
To restore the factory settings, see the Default button in 1.2.1 Front View.
Figure 2-2

Getting Started

2
http://192.168.0.10
5