GeoVision VSV13-A-EN User Manual page 37

To enable the VSM connection:
1. Activate Link: Enable the VSM monitoring.
2. Host Name or IP Address: Type the host name or IP address of VSM.
3. Port Number: Set the port matching the Video Server port on VSM. Or keep the
default value 5609.
4. User Name: Type the user name registered on VSM.
5. Password: Type the password registered on VSM.
6. Click Apply. The Connection Status should display "Connected" and connected time.
These options you can also find on this VSM setting page:
Cease motion detection message from: Stops notifying VSM of motion detection
from selected camera(s).
Cease input trigger message from: Stops notifying VSM of input trigger from
selected input(s).
Enable schedule mode: Starts the VSM monitoring based on the schedule you set in
the Select Schedule Time section.
For the related settings to activate VSM monitoring, see 4.1.2 Motion Detection, 4.2.2
Input/Output Settings.
Administrator Mode
4
33