GeoVision VSV13-A-EN User Manual page 64

9. Highlight the server, and select Display Position to map the IP camera to a channel
on the GV-System.
10. The Statue column now should display "Connect". Click OK.
Previewing Video and Setting Audio
To preview video and activate audio recoding, highlight the desired server (see Figure 7-4)
and select Preview & Audio Setting. This dialog box appears.
[Preview Channel Select]
Drop-down List: Select the desired camera for live preview
Preview dual stream record channel: The option is only available when the dual
stream is set, i.e. the cameras for live view and recording are configured differently
(see Figure 7-3). Check this option for recording preview.
[Audio Setting]
Monitor Sensitivity: Adjust the sensitivity of the audio that will be detected. The
higher the value, the more sensitive the system is to the surrounding sound.
Gain Control: Increase or decrease the gain of the microphone.
Wave Out: Enable this option to listen to live audio from the GV-Video Server.
Rec Audio: Enable this option to activate the audio recording.
60
Figure 7-4
Figure 7-5