Chapter 5 Recording And Playback; Recording; Playback - GeoVision VSV13-A-EN User Manual

Chapter 5 Recording and Playback

The GV-Video Server can record down video/audio directly to the attached USB mass
storage device. And you can play back the recorded files on the GV-System or over the
TCP/IP network.

5.1 Recording

To enable the recording function:
1. Attach the USB mass storage device to the GV-Video Server. See 4.8.2 Storage
Settings.
2. To set up the pre-recording, post-recording or audio recording, see 4.1.1 Video
Settings.
3. To set up the schedule for video recording or I/O monitoring, see 4.5 Recording
Schedule.
4. If you select the motion detection as recording mode, configure the areas for motion
detection. See 4.1.2 Motion Detection.
5. If you select I/O monitoring to trigger the recording, configure the operation of I/O
devices. See 4.2.2 Input / Output Settings.
6. To start recording and I/O monitoring, see 4.4 Monitoring.
The GV-Video Server will start recording in case of motion detection, I/O trigger, or during
the scheduled time.

5.2 Playback

Two methods are available to play back the video files recorded at the GV-Video Server:
•
Playback using the USB mass storage device by attaching it directly to the GV-
System
•
Playback using the Remote ViewLog function over the TCP/IP network
Recording and Playback
5
51