Zaction Examples; Extensions To The Default Matches - HP bh5700 User Manual

--drop
--accept
--set-prio <val>Set the 802.1p priority to <val>
--use-prio <val>Use queue priority <val>
--copy-cpu Send the packet to the CPU.
installed chains traversal in software
<val>
--set-tos <val> Set the IP-Precedence bits in the TOS field of
the IP header to <val>
--set-dscp <val>Set the 6-bit DSCP
header to <val>.
Options with any of these ZACTION parameters:
--counter <val> Increment classifier hit counter <val>
--arp
-i option can be used to specify ingress port or VLAN,
-d specifies target IP address,
-p specifies arp operation as request (1) or response (2).
For arp response, the -o field can be used to specify the egress port.

ZACTION Examples

Send all tcp packets arriving on zhp5 out port 2:
iptables -a FORWARD -i zhp5 -p tcp -j ZACTION --set-eport 2
Send all tcp packets arriving on zhp5 to the CPU (software).
iptables -a FORWARD -i zhp5 -p tcp -j ZACTION --copy-cpu
Set the 802.1p priority to 3 on all tcp packets arriving on zhp5.
iptables -a FORWARD -i zhp5 -p tcp -j ZACTION --set-prio 3

Extensions to the default matches

These are described in the Linux packet filtering HOWTO at:
http://netfilter.org/documentation/index.html#documentation-howto
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
Drops the packet
Accepts the packet
--set-eport <val>
--set-mport <val> Mirror the packet to port
Not an action,
manuals search engine
This will force the full
Redirect the packet to port <val>
in the TOS field of the IP
match only ARP packets.
release 3.2.2j page 64