Zffpcounter - HP bh5700 User Manual

zffpcounter

NAME
zffpcounter—Query or clear one or more Fast Filter Processor (FFP) counters.
SYNOPSIS
zffpcounter -P <zre_port> [-p <ppa>] [-i <index>]
<hostname>] [-c] [-d <level>]
DESCRIPTION
The switch enforces filtering rules through the FFP. Each filtering rule may specify an FFP
counter, to be incremented for every packet that matches that rule.
The zffpcounter command is used: (a) for querying the current value(s) of one or more
counters; or (b) for resetting one or more counters to zero. If a rule includes metering if the rule is
matched,
only packets which are in-profile increment the counter. Out of profile packets are counted in the
FFP out of profile counters, which are displayed using zffppacketcounter, which has
exactly the same format and syntax as zffpcounter.
The iptables or zirule utilities may be queried to see which rules, if any, are using FFP
counters.
OPTIONS
-h <hostname>
default, zffpcounter uses the local OpenArchitect switch.
-p <ppa>
which to query/clear.
0.
-c
counter(s), rather than querying.
-d
default level is one (1), which reports all errors.
the debug level higher produces more output.
currently the maximum output level.
-i <index> An index whose counters should be queried/cleared.
Individual values (such as 5) are acceptable.
given, zffpcounter uses all counters.
-P <zre_port>
<zre_port> (zre<n>).
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
Specifies the hostname to query/clear.
Specifies the Physical Point of Attachment (PPA) on
Specifies that zffpcounter should clear the specified
Sets the level of debugging output for zffpcounter.
(required) Print table entry that contains
manuals search engine
By default, zffpcounter uses the value
release 3.2.2j
[-h
By
The
Setting
Three (3) is
If no index is
page 288