HP bh5700 User Manual page 256

are supported.
enable;
The enable statement turns on stacking that has been previously configured. This statement
cannot be made until configuration is complete.
disable;
The disable statement turns off stacking. Before disabling stacking, all Ethernet Switch Blade
daemons must be stopped, and the VLAN configurations must be torn down using zconfig.
EXAMPLES
zstack stack0: ppa0 local
zstack stack1: ppa1 local
zstack stack0: zre0..23, zre48..49 = zre0..25
zstack stack1: zre24..47, zre50..51 = zre0..25
zstack stack0: trunk0 = zre26..27
zstack stack1: trunk0 = zre26..27
zstack stack0: stack1 = trunk0;
zstack stack1: stack0 = trunk0;
zstack enable
WILDCARDS
Wild card characters can be included to simplify the process of creating larger, more complex
configurations. Wild card characters for zconfig include:
,
..
Below are some examples for the correct usage of the comma (,) and dot-dot (..). Each line below
produces the same results:
stack0: zre4..7 = zre0, zre1, zre2, zre3;
stack0: zre4, zre5..7 = zre0..3;
stack0: zre4..7 = zre0, zre1..3;
stack0: zre4, zre5..7 = zre0..1, zre2..3;
The stack may also be in list form in the Stack Configuration command in similar fashion to the
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
(comma) Use for creating lists
(dot-dot) Specifies an inclusive range
manuals search engine
release 3.2.2j page 256