HP bh5700 User Manual page 278

zhp0: vlan100 = zre1,zre10,zre11,zre13;
The next statement adds two switch ports, zre1, zre2 and zre3, to an existing network interface
and VLAN.
zhp0: vlan100 = zre1..3;
The next statement deletes two switch ports, zre1 and zre2, to an existing network interface and
VLAN.
zhp0: zre1..2 teardown;
The final example is a teardown action that deletes the VLAN group defined in the previous
example, including the network interface.
zhp1: teardown;
Port Interface Statements
Port interface statements specify a port or trunk name or a list of such names; followed by an
equal sign (=) and then the action. Port interface actions may include:
SYNTAX
zconfig <zre_list>=untag<n>
untag<N>
transmitted without a VLAN tag. The port or trunk specified must
have previously been included in the VLAN group with VID<N>.
zconfig <zre_list> multicast=<forward_type>
<forward_type>
forward_type for multicast traffic.
are:
forward_unregistered (default)
forward_all
filter_unregistered
Examples of Port Interface Statements:
Assuming that zre1 has been assigned to VLAN 1, to specify that packets sent from port 1 for
VLAN 1 are transmitted without a VLAN tag, and packets arriving on this port without a VLAN
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
The next statement creates a VLAN group with the VID number 100 and the
network interface named zhp1. This VLAN includes four switch ports, zre1,
zre10, zre11, zre13.
Packets sent from this port or trunk for VLAN <N> are
Set the ports specified to act as defined by the
manuals search engine
Possible <forward_types>
release 3.2.2j page 278