HP bh5700 User Manual page 347

setmaxage
sets the bridge's maximum message age to <time> seconds.
setpathcost
sets the port cost of the port to <cost>. This is a dimensionless
metric. The path cost is set to 100 for all OpenArchitect switch
ports by default. IEEE 802.d recommends the following:
setportprio
sets the port's priority to <priority>. The priority value is an
unsigned 8-bit quantity (a number between 0 and 255), and has no
dimension. This metric is used in the designated port and root
port selection algorithms. For the OpenArchitect switch a port is
zre1, zre2, ...
NOTES
brctl(8) replaces the older brcfg tool.
SEE ALSO
zconfig , zl2d
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
<bridge> <time>
<bridge> <port>
Link
Speed
10 Mb/s
100 Mb/s
1 Gb/s
<bridge> <port>
manuals search engine
<cost>
Recommended Recommended
Value Range
100 50-600
19 10-60
4 3-10
<priority>
release 3.2.2j page 347