HP bh5700 User Manual page 334

files run the Surviving Partner. This is a list of all configuration and script files:
/etc/rcZ.d/S70Surviving_partner
The main startup script that starts the Surviving Partner by
running
the user to run this script.
zsync to automatically start the Surviving Partner at switch
boot.
/etc/rcZ.d/surviving_partner/vrrpd.conf
Configuration script for the VRRP daemon.
is used when the S70Surviving_partner script launches vrrpd.
There is a line in this file for each router address vrrpd
will manage.
command in the zspconfig configuration file results in a line
in vrrpd.conf.
/tftpboot/zsp.conf<n>
zspconfig configuration file that contains the configuration
of the sibling backup switches.
distinguish potentially more than one backup switch.
configuration file is placed in /tftpboot, and is retrieved
via DHCP by a replacement switch on boot up.
/etc/rcZ.d/surviving_partner/dhcpd.conf
Configuration script used by dhcpd when the switch becomes
master.
configuration scripts.
input to the zspconfig with the -u flag.
/etc/rcZ.d/surviving_partner/dhclient.conf
If zspconfig is executed with the -u flag, a dhclient.conf
file is created, and then dhclient is used to retrieve a
zspconfig configuration file from the /tftpboot area of the
Master switch.
/etc/rcZ.d/surviving_partner/vrrpd.script
Runtime script that executes each time the vrrpd changes
state.
bonding driver/RAINlink ports to force the
Master switch.
/etc/rcZ.d/surviving_partner/zlmd.script
Runtime script executed by zlmd when a link goes up or down.
This script modifies the priority of vrrpd, which in turn may
cause the VRRP Master to move from one sibling switch to
another.
SEE ALSO
zconfig, ifconfig, vrrpd, dhclient, dhcpd, zpeer
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
zconfig, ifconfig, zlmd and vrrpd.
Or stated another way, each virtual_address
dhcpd is used to serve replacement switches their
This script starts and stops dhcpd, and toggles down
manuals search engine
This file can be saved with
The <n> is used to
Namely a zsp_DC.conf file that can be
release 3.2.2j
zspconfig prompts
This configuration
This
nodes to a new
page 334