HP bh5700 User Manual page 166

The following table will translate the zlc output to link status.
Link: zre(X) – physical interface
Shelf Manager Status: EKEY_DISABLED - A slot or device that has been disabled by the Shelf
Manager.
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
Link Port Status Link Speed
Zre EKEY_DISA Auto
(x) BLED
EKEY_ENAB 1000fd
LED
UP 1000hd
DOWN 100fd
100hd
10fd
10hd
EKEY_ENABLED - A slot or device that has been enabled by the shelf
UP – The port has been configured to be active and has established a link
DOWN – The port has been configured to be active but has not establish a
Link Speed: Auto – Auto Negotiate with the other device. The node device
must be configured to Auto Negotiate as well or network connectivity errors
will occur.
manuals search engine
Pause Faults
Enable Internal Fault
Disable External Fault
manager and enabled by the Ethernet Switch Blade
switch.
with another network device.
link with another network device.
1000fd – Full Duplex Gigabit Ethernet
1000hd – Half Duplex Gigabit Ethernet
100fd – Fast Ethernet Full Duplex
100hd – Fast Ethernet Half Duplex
10fd – Ethernet Full Duplex
release 3.2.2j
OK
ON
page 166