example):
•
/usr/sbin/gated –f /etc/rcZ.d/gated.conf.rip1
The GateD conf file specifies the following configuration commands:
•
interface 10.0.0.42 passive
interface 10.0.1.42 passive
interface 10.0.2.42 passive
.
.
.
interface 10.0.13.42 passive
interface 10.0.14.42 passive
interface 10.0.15.42 passive
•
define 10.0.0.42 netmask 255.255.255.0;
define 10.0.1.42 netmask 255.255.255.0;
define 10.0.2.42 netmask 255.255.255.0;
.
.
.
define 10.0.13.42 netmask 255.255.255.0;
define 10.0.14.42 netmask 255.255.255.0;
define 10.0.15.42 netmask 255.255.255.0;
•
};
rip1 yes{
•
Ethernet Switch Blade User's Guide
Downloaded from
www.Manualslib.com
Starts GateD with Rip1 using gated.conf.rip1 as the configuration file:
Implements the passive function so GateD is prevented from rerouting information to a
different interface if insufficient information is received.
Defines the netmask used in the interface.
Sets the RIP1 protocol to open.
Shuts off sending and receiving packets from all interfaces.
manuals search engine
release 3.2.2j
page 103