Zconfig - HP bh5700 User Manual

Ethernet switch blade atca 14-slot blade server
Table of Contents

Advertisement

zconfig

NAME
zconfig - Configures the OpenArchitect switch.
SYNOPSIS
zconfig [-h <host_name>] [-d <level>] [-a] [-t] [{-f <file>} |
<configuration>]
DESCRIPTION
zconfig creates Virtual Local Area Network (VLAN) groups of switch ports or trunks. Each
VLAN group forms a Layer 2 switching domain. Each VLAN group has a VLAN Identification
number (VID) that can be carried in a tag field, located in the header of packets traveling on that
VLAN. The configuration of a port determines whether a packet transmitted from that port
includes the VLAN tag. A set of up to eight ports may be configured as a trunk, with all links
from these ports connect to the same link partner. For each VLAN group created by zconfig, a
network interface is also created. After the network interface is started by ifconfig(1M), the
VLAN group performs Layer 2 switching. The network interface can be used for Layer 3 routing
between VLAN groups.
A network interface uses the following format:
N-is an integer between 0 and 9999. The value of N is not required to be the same as any of the
port(s) that are its members. The range 0-4999 is reserved for network interfaces created by users.
The range 5000-9999 is reserved for network interfaces created by switch applications.
A trunk uses the format zrlK, where K is an integer between 0 and 31.
OPTIONS
-h <hostname>
default, zconfig configures the local OpenArchitect switch.
-d <level> Sets the level of debugging output produced by
zconfig. The default level is 1.
higher produces more output. The maximum output level is
currently four (4).
-a
-t
{-f <file>} | <configuration>
Gets configuration information from the specified file.
<file> name of '+' reads configuration data from standard
Ethernet Switch Blade User's Guide
Downloaded from
www.Manualslib.com
zhpN (e.g., zhp0)
Specifies the hostname to configure.
Displays the current configuration of the switch.
Tears down the entire switch configuration.
manuals search engine
Setting the debug level
release 3.2.2j
By
A
page 199

Advertisement

Table of Contents
loading

Table of Contents