Examples - HP 3500yl Series Access Security Manual

To enable instrumentation monitor using the default parameters and thresh-
olds, enter the general instrumentation monitor command. To adjust specific
settings, enter the name of the parameter that you wish to modify, and revise
the threshold limits as needed.

Examples

To turn on monitoring and event log messaging with the default medium
values:
(config)# instrumentation monitor
HP Switch
To turn off monitoring of the system delay parameter:
(config)# no instrumentation monitor system-
HP Switch
delay
To adjust the alert threshold for the MAC address count to the low value:
(config)# instrumentation monitor mac-address-
HP Switch
count low
To adjust the alert threshold for the MAC address count to a specific value:
(config)# instrumentation monitor mac-address-
HP Switch
count 767
To enable monitoring of learn discards with the default medium threshold
value:
(config)# instrumentation monitor learn-
HP Switch
discards
To disable monitoring of learn discards:
(config)# no instrumentation monitor learn-
HP Switch
discards
To enable or disable SNMP trap generation:
(config)# [no] instrumentation monitor trap
HP Switch
Configuring Advanced Threat Protection
Using the Instrumentation Monitor
11-37