HP bh5700 User Manual page 34

#start_script:/etc/rcZ.d/SxxScript;
#start_script:/etc/rcZ.d/SyyScript;
# vrrpd_script:
during
# vrrpd state transitions.
of the
# /etc/rcZ.d/surviving_partner/vrrpd.script file.
provided
# script must be well behaved.
delays it will
# effect the SurvivingPartner performance.
run in
# backround.
itself.
#vrrpd_script: /etc/rcZ.d/surviving_partner/my_vrrpd_script;
#vrrpd_script: /etc/rcZ.d/surviving_partner/my_vrrpd_script2;
# gated_template:
the
# gated.conf file to be used by the sibling group.
#gated_template: /etc/rcZ.d/surviving_partner/gated.template
These entries are optional:
If you use the special failover modes vlan or port ( see above for details), you can also specify an
individual address to be the default master, that is, that a port or VLAN should run on a specific
switch when the vrrp priorities are equal between switches.
NOTE: VLAN or port mastering is not appropriate for switch mode and should not be
attempted.
When addresses designated 'master' failover, they will return to their Master switch, whenever the
link is repaired. If they are not designated 'master', they will remain at the backup switch after
repairs.
If both switches are equal in priority for a VLAN, then the switch with theIPaddress designated
'master' will become Master for that VLAN.
Add the keyword "(master)" after one of the sibling_addresses. The local address comes first.
netmask 255.0.0.0;
Ethernet Switch Blade User's Guide
Downloaded from www.Manualslib.com
Allows the user to add scripts to be executed
If this is needed, have your script background
Allows the user to provide a template for
sibling_addresses: zhp1=10.0.0.30(master), 10.0.0.31
manuals search engine
These scripts are run from the end
If it crashes, or hangs or
The script is not
release 3.2.2j
The user
page 34